EAA Airventure Museum

Visitor Information
Museum Activities
Our Collection

The Virtual Museum
Flight Operations
Museum Education
Suport The Museum

Van Grunsven RV-3 Prototype – N17RV

Before 1972, most homebuilt aircraft seemed to fall into one of two categories: Fast & Nimble and a handful to fly and land, or Easy Handling but “unable to outrun an asthmatic hummingbird” (as writer Budd Davisson put it in a 1973 flight review for AIR PROGRESS magazine).

When Richard Van Grunsven’s RV-3 prototype first appeared at the 1972 EAA Oshkosh Convention, it didn’t attract a lot of attention—probably not as much as it should have. The little all-metal, single-seat RV-3 could cruise at 175 mph on 125 hp, and it certainly looked like a fast, nimble airplane. Though its “Hershey-Bar” wing didn’t quite fit the nimble or hot stereotypes, the RV-3 was rated for full aerobatics. This was definitely “back yard rocket” territory.

But the RV-3 prototype was also surprisingly easy to fly. It taxied well, popped into the air in 200 to 300 feet, and climbed like a rocket. It stalled sharply but recovered easily and quickly. Its elevator and aileron response was crisp and sure. The airplane could gallop at 175 mph on 75% power or trot along at 110 with the canopy slid back. With full flaps it would land at 60 to 70 mph and roll out straight and true in just 200 to 300 feet.

In 1974 the RV-3 returned to Oshkosh for a record-setting win in the Pazmany Efficiency Contest (one of the first “real-world” evaluations of homebuilt aircraft performance). In a timed, level run, Van Grunsven flew the RV-3 at over 207 mph. In the slow speed run, the RV-3 clocked just under 54 mph. That gave the airplane an efficiency score of 11.77. The closest competitor scored 10.45 and the average efficiency score for homebuilts at the time was 6.8—just over half the RV-3’s score.

A few years earlier, Van Grunsven had quit his job as a mechanical engineer to design and build homebuilt airplanes full-time. His design goal for the RV-3 (and the series that it spawned) was “total performance”—an airplane that would do a lot of things well, even though it might not be the best in any one flight regimen. He also designed the RV-3 to be comfortable to ride in and uncomplicated to build. That philosophy has held up well over time and helped make the RV series among the most popular and best-respected homebuilt airplanes. By mid-2004, the number of RVs built and flown was approaching 4,000. Of those, 317 were RV-3s.

The RV-3’s combination of speed, handling, aerobatics, and gentle manners wasn’t entirely unique among homebuilts in 1972, but those qualities did set the airplane apart from the crowd. Van Grunsven’s company, Van’s Aircraft, produced and sold RV-3 kits until 1996. Popular demand later brought the kit back into production with a few refinements.

RV-3 #1 was rebuilt to flying status by EAA Chapter 105 (Portland, Oregon), with help from Van Grunsven.

vangrunsven_rv3 Table of Contents

Accredited by the American Association of Museums
| Home | Visitor Information | Activities | News | Collection |
Virtual Museum |
| Flight Operations | Education | Support | Store | EAA Home |

All content, logos, pictures, and videos are the property of EAA
Copyright © 2014 - Experimental Aircraft Association, Inc.
Disclaimer/Privacy Statement
If you have any comments or questions contact webmaster@eaa.org

EAA Aviation Center P.O. Box 3086 Oshkosh, WI 54903-3086
Phone: 920.426.4800