EAA Airventure Museum

Home
Visitor Information
Museum Activities
Our Collection




The Virtual Museum
Flight Operations
Museum Education
Suport The Museum

Scaled Composites/Rutan Voyager Fuselage Replica

On December 23, 1986, the Burt Rutan-designed Voyager aircraft landed at Edwards Air Force Base in California, completing the first non-stop, non-refueled flight around the world by an airplane. Its flight of 26,366 statute miles lasted 9 days, 3 minutes, and 44 seconds, piloted by Dick Rutan (Burt’s brother) and Jeanna Yeager.

Today, the Voyager aircraft is displayed in the National Air & Space Museum in Washington, D.C. The centerpiece of the Voyager Exhibit in the EAA AirVenture Museum at Oshkosh is a full-scale replica of the Voyager’s fuselage and cockpit/cabin.

Burt Rutan made his reputation with innovative designs for homebuilt aircraft, including the VariViggen, VariEze, Long-EZ, and others. He and brother Dick conceived the idea of a non-stop, non-refueled, around-the-world flight in 1980. They predicted the project would take 18 months. It took 6 years.

Construction of the Voyager began in the summer of 1982, with a first flight two years later. The airframe was built without metal components. The main material used was a composite sandwich of paper honeycomb and graphite fiber, molded and oven-cured. Weight-saving materials kept the airframe to a structural weight of just 939 lbs.

Voyager is, in effect, a flying fuel tank. Its gross takeoff weight for the record flight was 9,694.5 lbs., of which 7,011 lbs. was fuel, carried in 17 tanks. When the flight ended nine days later, only 140 lbs. of fuel remained.

Power comes from two engines, one at each end of the fuselage. The rear engine, a 110-hp air-cooled Teledyne Continental IOL-200 ran for all but 8 minutes of the flight, when a fuel feed problem shut it down. The front engine, a 130-hp, air-cooled Teledyne Continental O-240, provided takeoff and climb power, and backup for the rear engine. Both engines swung aluminum Hartzell constant-speed, variable pitch propellers.

In the cramped cabin, the on-duty pilot (sitting on the right) flew the airplane, navigated, communicated with the ground, and transferred fuel to keep the airplane in trim. The off-duty pilot (lying on the left or behind) helped with navigation and flight monitoring, managed flight logistics, and rested—though in fact, neither pilot got much rest during the nine-day flight.

Voyager’s official average speed during the around-the-world flight was 116 mph. Its altitude averaged around 11,000 feet, climbing as high as 20,500 ft. Voyager’s route was set with the help of a team of meteorologists who guided the pilots around storms and into favorable winds.

Voyager’s flight was a stunning triumph, accomplished by Rutan’s project team, a host of volunteers, many small private contributions, and no government sponsorship.

scaledcomposites_voyager

Accredited by the American Association of Museums
  
| Home | Visitor Information | Activities | News | Collection |
Virtual Museum |
| Flight Operations | Education | Support | Store | EAA Home |


All content, logos, pictures, and videos are the property of EAA
Copyright © 2014 - Experimental Aircraft Association, Inc.
Disclaimer/Privacy Statement
If you have any comments or questions contact webmaster@eaa.org


EAA Aviation Center P.O. Box 3086 Oshkosh, WI 54903-3086
Phone: 920.426.4800